analyse and understand the process mentioned in the pdf it is the process behind our project for SIH under the topic of waste segregation and give me the 2D simulation with ui/ux user interface condition: 1) the waste must be moves throught the conveyor belt, 2) the pre trained camera at the beginning of the conveyor belt should detect the waste first, 3) then the camera should send signal to the servo motor, 4) then the servo motor pushes the waste according to its bin and also the conveyor should stop moving at that time, 5) if the waste is biodegradable it should be detected by moisture sensor and the servo motor near the biodegradable bin blocks the one side(wet) and allows another side(dry).
Postamble:
I modeled your SIH process as a state machine driven by stations: ESP32‑CAM (classification at belt start), per‑bin servo pushers that pause the belt during actuation, and a moisture sensor at the biodegradable gate to route to Bin‑1 (Wet) or Bin‑2 (Dry). Use the control panel to start/pause/reset, adjust conveyor speed, spawn rate, camera confidence, and moisture wet probability, or manually spawn specific waste types; counters and status lines update live as items are detected and sorted.
i cant start the conveyor and also cant press the start button
If “Start” still doesn’t respond, open your browser console and click it—you should see [v0] Start/Pause clicked… If you don’t, an overlay may be intercepting clicks; tell me if you see any console errors or missing logs. Otherwise, once it toggles, items should spawn automatically and the belt should animate; you can also manually add an item using the Add Item buttons.
add items manually